goon.bestCalculatorHow it worksDelay rangesFAQAbout
Audio production tool · reviewed November 2026

Delay Time Calculator: BPM to Milliseconds

An echo that lands on the beat sounds like part of the track. One that does not sounds like a mistake. Enter your tempo and get the delay time for every note value, straight, dotted and triplet, along with the matching frequency in hertz.

Tempo-synced delay table

One quarter note = 400.00 ms at 150 BPM.

Note valueStraight (ms)Dotted (ms)Triplet (ms)Straight (Hz)Range
1/11,600.02,400.01,066.70.62
1/2800.01,200.0533.31.25
1/4400.0600.0266.72.50
1/8200.0300.0133.35.00slapback range
1/16100.0150.066.710.00slapback range
1/3250.075.033.320.00short (no echo)

Method: a quarter note lasts 60,000 ÷ BPM milliseconds. A note value of 1/n lasts that time × 4 ÷ n. A dotted note is × 1.5, a triplet is × 2/3, and frequency in hertz is 1,000 ÷ milliseconds. The range column marks times that fall in the ranges Wikipedia gives for short delays and slapback echo.

How the numbers are built

Tempo is a count of beats per minute, so one beat lasts 60,000 milliseconds divided by the tempo. A quarter note is one beat in 4/4 time. Every other note value is a fraction or multiple of it, which is why the whole table follows from a single division.

Worked example at 150 BPM

One quarter note is 60,000 ÷ 150 = 400 ms. An eighth note is half of that, 200 ms. A dotted eighth is 1.5 × 200 = 300 ms, and an eighth-note triplet is 200 × 2/3, about 133.3 ms. A sixteenth is 100 ms. Those are the figures the table shows for 150 BPM.

Other tempos

The same division works at any tempo. At 128 BPM a quarter note lasts 60,000 ÷ 128 = 468.75 ms, an eighth is 234.4 ms and a dotted eighth is 351.6 ms. At 140 BPM a quarter note lasts 428.6 ms. Faster tempos give shorter delays, which is why a delay set by ear at one tempo needs resetting for the next track.

Setting the plugin

Many delay plugins sync to the project tempo on their own. The table is for the cases where they do not: a hardware unit, a plugin with only a milliseconds knob, or a free-running modulation source you want to match to the song.

What different delay times sound like

Wikipedia’s article on the delay audio effect separates delays by length. These are the commonly cited figures as that article gives them. Wikipedia is a secondary source, so treat the limits as rough guides.

Delay timeEffect
50 ms or lessBroadens the sound without a perceptible echo
30 to 50 msTypical doubling echoes; longer ones become slapback
60 to 250 msSlapback echo, with little or no feedback
10 seconds or moreLoops of a whole musical phrase

The same article gives a figure for sound travelling through air: about 1 millisecond of delay per foot, or 3 milliseconds per metre. It is useful when you time a speaker placed behind another speaker.

Delay questions

How do I convert BPM to a delay time?

Divide 60,000 by the BPM to get one quarter note in milliseconds. Then multiply by 4 ÷ the note value: a half note is twice a quarter, an eighth is half. At 120 BPM a quarter note is 500 ms and an eighth note is 250 ms.

What are dotted and triplet delays?

A dotted note lasts one and a half times the straight note. A triplet note lasts two thirds of it. At 120 BPM a dotted eighth is 375 ms and an eighth-note triplet is 166.7 ms.

What delay time counts as slapback?

Wikipedia says slapback echo uses a delay time of 60 to 250 milliseconds with little or no feedback. It also says short delays of 50 ms or less broaden a sound without creating a perceptible echo.

Why show hertz?

If you use a tempo-synced modulation effect, its rate in hertz is 1,000 divided by the time in milliseconds. The table gives that number so you can set a free-running oscillator to match.

About this site

Goon.Best is an independent informational site with a free audio calculator. It sells nothing, takes no advertising and collects nothing from you. The conversion is standard tempo arithmetic. The delay ranges are commonly cited figures from the Wikipedia article “Delay (audio effect)”, a secondary source. Last reviewed: November 2026.